Enphase Wifi Setup
Changed your internet provider or WIFI router? Easy to follow instruction on setting up the Enphase Envoy to your new connection.
If you have a WPS button on your router then it could not be simpler.
1 – Press and hold the WPS button on your wireless router for two seconds. On many routers, the WPS button flashes at this point.
2 – Return to the Envoy. Press and hold the Envoy WPS button below the phone icon for 5 seconds. WPS mode will not be enabled if the button is held for less than 5 seconds. When WPS mode is enabled the LED next to the phone icon will flash green.
If the connection is successful, within two minutes the top LED with the cloud icon will light up solid green.
If it lights up solid green then you’re back online.
Your system now needs to re-sync its data, which can take anywhere from an hour to a few days depending on how long your system was offline. Typically it’s just a few hours.
What to do if the connection was not successful.
If the top LED does not light up solid green, the connection may have timed out before you completed steps 1 and 2 above. Walk through both steps again, trying to complete all steps within a two-minute window.
If you are unable to re-establish a wi-fi connection using the steps above, try to establish a connection using Manual Network Setup. See the video, below, for simple to follow instructions.